The Parker Cloth can be adapted into an impeller type product, commonly used as a non-woven roller brush for plate brushing and cleaning, mounted on a small rotary sander, either stationary or mobile.
The advantage of this configuration is that it combines the highly efficient polishing properties of the cleansing cloth with the wide range of applications of the rotary sander. Often, it can be used as a final polishing process;
The rotational speed can be determined according to the actual situation on site, but it is generally not recommended to exceed 3,000rpm (200mm OD), otherwise it will affect the durability of the Pacifier Cloth Wheel.
The rotational speed of 2500rpm, polishing hard aluminum alloy castings can reach a gloss level of more than 60. This process is more common in the field of polishing aluminum, copper or precision cast parts. Of course it is possible to add polishing liquid (wax) to further increase the gloss level.
And even if the cloth is made into a wheel, the softness of the cloth itself is not reduced, and it can be used directly for manual use if needed again.
Compared with coated sandpaper vibration sanding, the cutting force is easier to control, more suitable for low cutting volume, polishing type of water grinding. Cleaning and polishing in one step. According to the roughness of the surface to be polished, use different particle size of the cleaning cloth. You can also choose to use a water jet or dust extraction sanding machine, which is more suitable for a wider range of applications.