Polishing wax alias polishing paste, polishing soap, polishing bricks.
Ingredients of Polishing Wax:
With high-grade fatty acids and high-grade fatty alcohols born of esters as important ingredients, from animal natural waxes such as cetyl wax, beeswax, wool wax, Brazilian carnauba wax, small candle tree wax, wood wax fragrance wax; with hydrocarbons as an important ingredient of mineral natural waxes, such as liquid white wax, petroleum jelly, white wax, microcrystalline wax, white wax, lignite wax; chemically modified natural waxes, such as various types of wool wax chemically modified derivatives, and so on.
Brief introduction:
Polishing wax is divided into: green wax, purple wax, blue wax, black wax, yellow wax
The main components of polishing wax: stearic acid, soft acid, oleic acid, rosin and other viscosifiers, plus abrasives, such as feldspar powder, chromium oxide, corundum, iron red, etc., according to the different substrate composition and requirements made of different fineness and varieties.
Different colors indicate different varieties of polishing waxes to avoid confusion in use. High content of abrasive can accelerate the whole polishing process. This process is the polishing wax polishing wheel surface movement and make the material become smooth.
Usage method:
1, Turn the wheel towards yourself and run it at full speed. Lean against the edge of the wheel for a few seconds with the polishing wax so that the wax adheres to the wheel (do not place the wax on an already polished object).
2, Hold the workpiece lightly against the wheel surface and make sure that the workpiece is below the level of the wheel’s center axis, otherwise the wheel may throw the workpiece out of your hand. The correct way to do this is to gently touch the wheel with the workpiece and then remove it.
3,Add additional wax if necessary. If too much wax is used inadvertently, wipe it off with an iron brush or other tool and reapply if necessary.
4,When the workpiece enters the finishing (polishing) process, do not leave any rough particles in the wheel.
5,When polishing is completed, wipe the surface of the workpiece with a soft cloth moistened with talcum powder to remove the wax.
Use polishing wax:
1. Polishing process classification:
- rough polishing, medium polishing and fine polishing, fine polishing.
2.Scope of application of polishing wax:
- White polishing paste is suitable for fine polishing of any material.
- Green polishing paste is suitable for mirror polishing of any workpiece.
- Purple polishing paste is suitable for medium polishing of any metal or non-metal pieces.
- Yellow polishing paste is suitable for rough polishing of metal or non-metal.